How to resolve error Couldnt Update the System Reserved Partition on Windows

The error "Couldn’t Update the System Reserved Partition on Windows" occurs when the SRP is smaller in previous Windows versions.

Here at Ibmi Media, as part of our Server Management Services, we regularly help our Customers to perform Windows related issues.

In this context, we shall look into the methods to implement System Reserved Partition on Windows.

More information about System Reserved Partition ?

When we perform a clean OS install, Windows Installer creates a special System Reserved Partition (SRP) on the Master Boot Record (MBR) disk partition table.

This is a hidden partition with the NTFS file system, which is not assigned a drive letter by default and does not appear in File Explorer.

In Windows 7/Windows Server 2008 R2 the size of the System Reserved partition is 100 MB, in Windows 8.1/Windows Server 2012 R2 it is 350 MB, and in Windows 10/Windows Server 2016 it is increased to 500 MB.

The System Reserved Partition in Windows

i. First, let us find the location of the System Reserved partition and how to view its contents.

ii.Run the Computer Management, mmc snap-in and select Storage -> Disk management. As we can see, in Windows 10, the 500MB SRP is in front of the system partition (C:\).

iii. The following volume attributes are assigned to the SRP: Primary partition, Active and System.

iv. The System Reserved partition is only present on BIOS computers or UEFI devices that have the Legacy Compatibility Support Module (CSM) enabled.

v. We use the MBR (Master Boot Record) partition table on the system disk of such computers. On computers with UEFI in native mode and GPT partition table, there is no SRP partition.

vi. By default, the SRP does not assign a drive letter. We can set the drive letter through the Disk Management Console (diskmgmt.msc) or using the PowerShell command:

Get-Partition -DiskNumber 0 -PartitionNumber 1|Set-Partition -NewDriveLetter R

If we are installing Windows to a disk with existing partitions, the installer does not create a separate 500 Mb System Reserved partition.

In this case, the Boot Manager bootloader files are on the same volume where Windows is.

Use of System Reserved Partition on Windows

In earlier versions of Windows, boot files were on the partition with the installed OS.

Starting with Windows 7, MSFT developers added a separate hidden System Reserved partition to store bootloader files. This solution helps to protect the bootloader files from users and improve the stability of Windows.

The System Reserved partition contains:

i. Windows bootloader (bootmgr), and a file with the bootloader configuration BCD (Boot Configuration Data).

ii. Service data of the BitLocker encryption subsystem.

iii. Windows Recovery Environment (WinRE) files to troubleshoot various boot problems.

iv. System Volume Information folder for system recovery points metadata.

v. BOOTNXT – to boot Windows from USB flash drives (for example, for Windows To Go).

vi. BAK – a backup of the boot sector used on MBR disks.

Can we Delete the System Reserved Partition on Windows?

We should not delete the SRP without a good reason, and even more so to save disk space (500 MB is not so much).

Without this partition, Windows will not be able to boot. 

If the boot partition with the bootloader configuration is missing, errors may appear:

File: \boot\BCD Status: 0xc00000f The Boot Configuration Data for you PC is missing or contains errors.

In this case, we have to manually restore the Windows bootloader and place it on the system drive C.

How to Create a System Reserved Partition Manually in Windows ?

If we delete the SRP (or it is initially missing) and want to restore it, we follow these steps:

Use the diskpart tool to shrink the Windows partition by 500 MB (For example, here we assume Windows is installed on partition 1):

list volume
select volume 1
shrink desired=500
Create a new 500 MB NTFS partition:
create partition primary
format fs=ntfs
assign letter R

Then, place the Windows bootloader files on the new partition:

bcdboot C:\windows /s R:
bootrec /fixmbr
bootrec /fixboot
bootrec /rebuildbcd

However, in most cases, it is easier to move the bootmgr configuration to the Windows system partition.

[Finding it difficult to fix Windows related errors? Don't worry, We are here for you.]

Windows can't boot after Accidentally Deleted SRP ?

If other partitions prevent us from shrinking/extending the Windows volume, we can restore the bootloader configuration and place it on the partition where Windows is installed.

Let us take a look at the steps to fix Windows boot after deleting an SRP:

i. First, we cross-check that the System Reserved partition is missing from any Windows boot/installation media (USB flash drive or DVD).

ii. On the installation screen, we press Shift+F10 to open a command prompt. Run diskpart and list the volumes:

list volume

As we can see, the SRP is missing, and of course, the Windows cannot boot from this disk.

In this case, to restore the system, we need to recreate the bootloader entries.

In order not to create the separate 500 MB SRP, the bootmgr bootloader files can be re-created on a system drive C:\.

Hence, we run the following commands in WinPE command prompt to place the boot environment files on drive C:\ and specify the path to the Windows directory:

bcdboot c:\windows /s c:

If successful, the command will return Boot files successfully created.

Furthermore, we need to overwrite the boot sector:

bootsect.exe /nt60 All /force

If the error “Element not found” appears, try to make the system partition active using diskpart.

Then, make the C:\ partition active. To do it, we execute the following commands:

list disk
select disk 0
list partition
select partition 1

Note: we should see the message "DiskPart marked the current partition as active"


Furthermore, we run the below commands one by one:

bootrec /fixmbr
bootrec /fixboot
bootrec /scanos
bootrec /rebuildbcd

The third command will scan all disks and try to find installed Windows copies. In our example, the OS is in the C:\Windows folder. The system will ask to add these Windows entries to the boot list. Confirm it.

Finally, restart the computer and make sure that Windows is booted correctly. Make sure that bootmgr file is present in the root of the system drive C:\.

"Couldn’t Update the System Reserved Partition" on Windows 10 ?

When upgrading from Windows 7/8.1 to Windows 10 (or when upgrading to the new Windows 10 build), we may receive 0xc1900104 or 0x800f0922 errors.

This is because the SRP is small in previous Windows versions than in Windows 10. Generally, if the SRP is full and there is not enough free space (at least 15 MB) to place the Windows bootloader system files, we will get this error.

In this case, Microsoft recommends deleting the font files from the R:\Boot\Fonts directory to free up space on the SRP or we can try to expand the SRP using any third-party partition manager tool on a bootable USB stick.

[Need help to manage SRP in Windows 10? We are available 24*7]


This article will guide you on the steps to resolve the #Windows #error Couldn’t Update the System Reserved #Partition on Windows. #System Reserved Partition is a hidden partition with the #NTFS file system, which is not assigned a drive letter by default. 

For Linux Tutorials

We create Linux HowTos and Tutorials for Sys Admins. Visit us on

Also for Tech related tips, Visit or General Technical tips on